Description

120m HDMI Matrix Extender over IP is a device based on the standard TCP/IP protocol for transmitting HD audio and video source over LAN

It transmits your HD display with the high resolutions up to 120 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable.

At the same time, it’s also convenient to transmit HDMI audio and video source by point-to-point, multipoint-to-multipoint and cascade connection mode.

HDMI Matrix Extender Over IP

HDMI high-definition splitter implements pure plug-and-play signal splitting technology.

High-definition signal is splitted into four channel without quality loss.

Full-metal dull – polished housing – low key elegance

HDMI high-definition splitter full-metal anode-oxidized shell is not only meant to bring you a fine metal texture feel.

But also ensure best heat dissipation, signal shielding and anti-interface properties.

Signal buffering and amplification

HDMI Matrix Extender over IP splitter includes signal buffering and amplification capabilities supported front-end and rear-end cable length is solid 15m. Now long distance multi-channel HD signal transmission to several screens is handled easily.

Connection and operation

Connect the HDMI source to the HDMI Transmitter with HDMI cable.

Connect the HDMI receiver to the HDTV display with HDMI cable.

Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.

Connect the “IR receiver “into “IR-TX” port on transmitter, and “IR transmitter ” into the “IR-RX” on receiver.

And make sure the IR transmitter aim at IR receiver of the controlled devic.

Connect two pieces of 5V power supply to the transmitter and receiver.

Power supply for the equipment and the LED indicator light on.

When status lamp on and flicker, equipment starts normal.